warm mix asphalt testing

Warm Mix Asphalt (WMA)

1.1 This is a specification intended for use in placing Warm Mix Asphalt (WMA) on highways, primary and secondary routes. This work consists of an asphalt mixture composed of mineral aggregate, aggregate screening, natural sand, asphalt binder, hydrated l

Learn More

Warm Mix Asphalt Final Report

The performance of pavements constructed using warm mix asphalt (WMA) technology were compared to the performance of conventional hot mix asphalt (HMA) pavements placed on the same project. Measurements of friction resistance, rutting/wear, ride and pavem

Learn More

Item 341 Dense-Graded Hot-Mix Asphalt

with Item 301, “Asphalt Antistripping Agents.” Do not add lime directly into the mixing drum of any plant where lime is removed through the exhaust stream unless the plant has a baghouse or dust collection system that reintroduces the lime into the drum.

Learn More

WARM MIX ASPHALT (BDE)

“Note 3. Warm mix additives or foaming processes shall be selected from the current Bureau of Materials and Physical Research Approved List, “Warm-Mix Asphalt Technologies”.” Equipment. Revise the first paragraph of Article 1102.01 of the Standard Specifi

Learn More

RC-1556 – Laboratory Evaluation of Warm Mix Asphalt

on the testing results, and presented in this study to allow contractors and state agencies to successfully design WMA around the state of Michigan. 17. Key Word . Warm Mix Asphalt, Asphalt Mixture, Laboratory Testing, WMA Design Frame Work. to the public

Learn More

Getting started with warm mix asphalt - New York State

to the asphalt mix plant. An existing tank, such as one used for anti-strip, can store bulk Evotherm. We can also provide iso - tainers or vendor managed inventory. Just getting started? Evotherm is available in intermediate bulk storage units. Add a port

Learn More

SPECIFICATIONS FOR ASPHALT PAVING, MATERIALS, SAMPLING, AND

Warm Mix Asphalt, as outlined in OPSS 310 - Appendix C, is required when the minimum ambient temperature conditions for paving set out in Section 12.2 of this specification, are not satisfied. All extra costs for the supply and placement of the Warm Mix A

Learn More

Pavement Manual: Hot-Mix Asphalt Pavement Mixtures

A variation on traditional hot-mix asphalt is warm-mix asphalt (WMA). WMA technologies are processes or additives to HMA that allow mixture production and placement to occur at temperatures (30-100ºF) lower than conventional HMA without sacrificing perfor

Learn More

Warm-Mix Asphalt Study: Laboratory Test Results for

performance to an equivalent hot-mix asphalt . The AkzoNobel study, like the Caltrans study, compared the performance of a control mix, produced and constructed at conventional hot-mix asphalt temperatures, with a warm-mix produced with Rediset. This warm

Learn More

Best practice guideline for warm mix asphalt

Warm mix asphalt defined Warm mix asphalt is the manufacturing and paving of asphalt mixes at significantly lower temperatures than conventional HMA, while maintaining or even exceeding the quality of conventional HMA mixes. WMA can be conveniently classi

Learn More

Last Revised: December 2006 - Warm Mix Asphalt

Material Test Framework for Warm Mix Asphalt Trials A number of new processes have been developed to allow asphalt mixtures to be mixed and compacted at lower temperatures. These processes tend to reduce the viscosity of the mixture at mixing and compacti

Learn More

AMENDMENT TO OPSS 313, NOVEMBER 2016

Warm Mix Asphalt (WMA) means warm mixed, warm laid asphaltic concrete produced using technologies that allow for the mixing, handling and compaction of the asphaltic concrete mixture at a temperature typically 20 to 50 °C lower than conventional HMA.

Learn More

EDC-1: Warm Mix Asphalt | Federal Highway Administration

Warm Mix Asphalt Warm Mix Asphalt (WMA) is the generic term for a variety of technologies that allow producers of Hot Mix Asphalt (HMA) pavement material to lower temperatures at which the material is mixed and placed on the road. It is a proven a technol

Learn More

Warming Up to New Ideas: The Pros and Cons of Warm-Mix Asphalt

Additional Warm-Mix Projects: NCHRP 09-52, NCHRP 09-53. TTI-led research into warm-mix asphalt continues in two just-launched NCHRP projects: 09-52 (Short-Term Laboratory Conditioning of Asphalt Mixtures) and 09-53 (Properties of Foamed Asphalt for Warm M

Learn More

Warm Mix Asphalt Testing - Video Results

More Warm Mix Asphalt Testing videos

Learn More

Warm Mix Asphalt - Purdue Engineering

Warm Mix Asphalt Voids in the mix versus temperature via vibratory compactor (PG 64-22 mixes) 0.0 2.0 4.0 6.0 8.0 300F 265F 230F 190F Compaction Temperature VT M GRANITE LIMESTONE 0.0 2.0 4.0 6.0 8.0 300F 265F 230F 190F Compaction Temperature VTM HMA EVOT

Learn More

20 Spec -Section 460 Hot Mix Asphalt Pavement

Revise 460.2.1 to specify target air voids for SMA mix designs. (1) Furnish a homogeneous mixture of coarse aggregate, fine aggregate, mineral filler if required, SMA stabilizer if required, recycled material if used, warm mix asphalt additive or process

Learn More

Warm Mix Asphalt With RAP

Warm Mix Scan Tour – Warm Mix allowed the use of more RAP – Benefits of Warm Mix with high RAP Viscosity reduction aided in compaction Decreased temperatures decreases aging of binder in return helps to compensate for aged RAP binder Better density result

Learn More

QC/QA TESTING DIFFERENCES BETWEEN HOT MIX ASPHALT (HMA) AND

QC/QA Testing Differences Between Hot Mix Asphalt (HMA) and Warm Mix Asphalt (WMA) Introduction The following report summarizes the work accomplished to date on a three-year (a 1-year extension to include laboratory compacted foam WMA was approved for FY

Learn More

Evaluation of Warm Mix Asphalt Technologies

Evaluation of Warm Mix Asphalt Technologies . NTPEP Designation: WMA-16 . INTRODUCTION The National Transportation Product Evaluation Program (NTPEP) was established to minimize the amount of duplicative testing of performed transportation materialsby AAS

Learn More

Warm Mix Asphalt

Warm-Mix Usage Reaches New Heights. The latest NAPA/FHWA survey of asphalt producers' use of recycled materials and warm-mix asphalt find that nearly a quarter of all asphalt produced during the 2012 construction season was produced using warm-mix asphalt

Learn More

(PDF) A Review on Warm Mix Asphalt - ResearchGate

Use of Warm Mix Asphalt (WMA) technologies is known as an effective method to reducing the energy consumption and emissions associated with conventional Hot Mix Asphalt (HMA) production.

Learn More

APPROVED LIST OF WARM-MIX ASPHALT (WMA) TECHNOLOGIES

“Terex Warm Mix Asphalt System” A.Scope A Warm-Mix Asphalt (WMA) Technology will be tested and approved prior to use one an Illinois Tollway project. The following guidelines provide the submittal and testing requirements for Illinois Tollway WMA Technolo

Learn More

LABORATORY TESTING OF ORGANIC AND CHEMICAL WARM MIX ASPHALT

Warm Mix Asphalt (WMA) technologies allow significant lowering of the production and paving temperature of the conventional Hot Mix Asphalt (HMA), which promise various benefits, e.g. lowering the greenhouse gas emissions, reduction of energy consumption,

Learn More

Warm Mix Asphalt technologies | Asphalt magazine

The National Cooperative Highway Research Program (NCHRP) has just recently awarded Project 9-43, Mix Design Practices for Warm-Mix Asphalt Technologies. The objective of this $500,000, 36-month research project is to develop a performance-based mix desig

Learn More

Inquiry